SST39VF040-70-4C-WHE
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-TFSOP (0.488, 12.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | SST39 MPF™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SST39VF040 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Memory Size | 4Mb 512K x 8 |
| Nominal Supply Current | 20mA |
| Memory Type | Non-Volatile |
| Max Supply Current | 20mA |
| Access Time | 70ns |
| Memory Format | FLASH |
| Memory Interface | Parallel |
| Data Bus Width | 8b |
| Organization | 512KX8 |
| Write Cycle Time - Word, Page | 20μs |
| Address Bus Width | 19b |
| Density | 4 Mb |
| Standby Current-Max | 0.000015A |
| Sync/Async | Asynchronous |
| Word Size | 8b |
| Programming Voltage | 2.7V |
| Data Polling | YES |
| Toggle Bit | YES |
| Command User Interface | YES |
| Number of Sectors/Size | 128 |
| Sector Size | 4K |
| Height | 1.05mm |
| Length | 8.1mm |
| Width | 12.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SST39VF040-70-4C-WHE Overview
A Non-Volatile-type memory can be classified as the memory type of this device. Tray-cases are available. There is a 32-TFSOP (0.488, 12.40mm Width) case embedded in it. The chip has an 4Mb 512K x 8 memory. As with most mainstream devices, this one uses FLASH-format memory. A wide operating temperature range makes this device ideal for a variety of demanding applications. It is supplied votage within 2.7V~3.6V. It is recommended to mount it in the Surface Mount mounting type. The chip has 32 terminations. The comprehensive working procedure of this part involves 1 functions. An 3V supply is required for this ic memory chip to operate properly. In order to select similar parts, typical manufacturers refer to SST39VF040 as the device's base part number. It is encased in an 32-pin package that contains this ic memory chip. The memory device in question has 32 pins, thus indicating that it has 32 memory locations that can be accessed. The operating supply voltage of this memory chip is noted to be 3.3V. The nominal supply current of this memory component is 20mA. In its target applications, this memory ics plays an important role as a member of the SST39 MPF? series of memory devices. To alter the state of certain nonvolatile memory arrays, 2.7V programming voltage is required. A ic memory chip like this one processes data at a frequency of 1kHz bits per second. A total of 128 specifically sized divisions are contained in this memory. In order for ic memory chip to run, it needs a maximum current of 20mA .
SST39VF040-70-4C-WHE Features
Package / Case: 32-TFSOP (0.488, 12.40mm Width)
32 Pins
Operating Supply Voltage:3.3V
Freguency at 1kHz
1kHz terminals
SST39VF040-70-4C-WHE Applications
There are a lot of Microchip Technology SST39VF040-70-4C-WHE Memory applications.
- personal computers
- personal digital assistants
- graphics card
- workstations,
- mainframes
- printers
- cell phones
- DVD disk buffer
- eDRAM
- Cache memory