SST39VF010-70-4C-WHE
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-TFSOP (0.488, 12.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | SST39 MPF™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | 3A991.B.1.A |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 14MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | SST39VF010 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Memory Size | 1Mb 128K x 8 |
| Nominal Supply Current | 20mA |
| Memory Type | Non-Volatile |
| Access Time | 70ns |
| Memory Format | FLASH |
| Memory Interface | Parallel |
| Data Bus Width | 8b |
| Organization | 128KX8 |
| Write Cycle Time - Word, Page | 20μs |
| Address Bus Width | 17b |
| Density | 1 Mb |
| Standby Current-Max | 0.000015A |
| Sync/Async | Asynchronous |
| Word Size | 8b |
| Programming Voltage | 2.7V |
| Data Polling | YES |
| Toggle Bit | YES |
| Command User Interface | YES |
| Number of Sectors/Size | 32 |
| Sector Size | 4K |
| Height | 1.05mm |
| Length | 12.5mm |
| Width | 8.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SST39VF010-70-4C-WHE Overview
Non-Volatile is its memory type. It comes in a Tray. 32-TFSOP (0.488, 12.40mm Width) case encloses it. The chip has an 1Mb 128K x 8 memory. FLASH-format memory is used in this device, which is a mainstream design. 0°C~70°C TA is an extended operating temperature range, making this device ideal for demanding applications. The device is capable of handling a supply voltage of 2.7V~3.6V. It is recommended to mount it in the Surface Mount mounting type. 32 terminations are planted on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3V volt power supply in order to operate properly. It is common to select similar parts by referring to the device's base part number, SST39VF010. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. A memory device like this has 32 pins, indicating that there are 32 memory locations on the device. This memory's operating supply voltage is 3.3V. The nominal supply current of this memory component is 20mA. As a member of the SST39 MPF? series memory devices, this part plays an important role for its target applications. Nonvolatile memory arrays require 2.7V programming voltage to change their state. As a result of the frequency of this memory chip, data can be processed at a rate of 14MHz. There are a total of 32 specific sized divisions in this memory.
SST39VF010-70-4C-WHE Features
Package / Case: 32-TFSOP (0.488, 12.40mm Width)
32 Pins
Operating Supply Voltage:3.3V
Freguency at 14MHz
14MHz terminals
SST39VF010-70-4C-WHE Applications
There are a lot of Microchip Technology SST39VF010-70-4C-WHE Memory applications.
- multimedia computers
- mainframes
- eSRAM
- cell phones
- nonvolatile BIOS memory
- telecommunications
- graphics card
- servers
- Cache memory
- hard disk drive (HDD)