SST39SF010A-70-4C-PHE
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 32-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | SST39 MPF™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | 3A991.B.1.A |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 14MHz |
| Base Part Number | SST39SF010A |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Memory Size | 1Mb 128K x 8 |
| Nominal Supply Current | 25mA |
| Memory Type | Non-Volatile |
| Access Time | 70ns |
| Memory Format | FLASH |
| Memory Interface | Parallel |
| Data Bus Width | 8b |
| Organization | 128KX8 |
| Write Cycle Time - Word, Page | 20μs |
| Address Bus Width | 17b |
| Density | 1 Mb |
| Standby Current-Max | 0.0001A |
| Sync/Async | Asynchronous |
| Word Size | 8b |
| Programming Voltage | 5V |
| Data Polling | YES |
| Toggle Bit | YES |
| Command User Interface | YES |
| Number of Sectors/Size | 32 |
| Sector Size | 4K |
| Height | 3.81mm |
| Length | 42.04mm |
| Width | 13.97mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SST39SF010A-70-4C-PHE Overview
Its memory type can be classified as Non-Volatile. It is supplied votage within Tube. As you can see, it is embedded in 32-DIP (0.600, 15.24mm) case. 1Mb 128K x 8 is the chip's memory size. As with most mainstream devices, this one uses FLASH-format memory. A wide operating temperature range makes this device ideal for a variety of demanding applications. With 4.5V~5.5V as the supply voltage, it is capable of handling memory ics. Its recommended mounting type is Through Hole. On the chip, there are 32 terminations that are planted. The comprehensive working procedure is supported by 1 functions in this part. In order to function properly, this ic memory chip should be powered by a voltage of 5V. It is common to select similar parts by referring to the device's base part number, SST39SF010A. The ic memory chip comes in a package with 32 pins that allows it to be connected to a computer. The memory device has a total of 32 pins, thus indicating that it has a total of 32 memory locations. This memory runs on an 5V operating supply voltage. This memory chip is rated 25mA for its nominal supply current. As for power supplies, this memory chip requires just 5V . In its target applications, this memory ics plays an important role as a member of the SST39 MPF? series of memory devices. There is a need for a programming voltage of 5V in order to modify the state of some nonvolatile memory arrays. A frequency of 14MHz is used to process the data on this memory chip. Total, there are 32 specifically sized divisions within this memory.
SST39SF010A-70-4C-PHE Features
Package / Case: 32-DIP (0.600, 15.24mm)
32 Pins
Operating Supply Voltage:5V
Freguency at 14MHz
14MHz terminals
SST39SF010A-70-4C-PHE Applications
There are a lot of Microchip Technology SST39SF010A-70-4C-PHE Memory applications.
- main computer memory
- Camcorders
- graphics card
- DVD disk buffer
- nonvolatile BIOS memory
- networking
- personal digital assistants
- servers
- cell phones
- personal computers