SP2526A-2EN-L/TR
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Power Dissipation-Max | 500mW |
| Nominal Supply Current | 110μA |
| Current - Output | 1A |
| Adjustable Threshold | NO |
| Turn On Delay Time | 100 μs |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.16mA |
| Turn-Off Delay Time | 800 ns |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 110mOhm |
| Height | 1.75mm |
SP2526A-2EN-L/TR Overview
You get it with the SOIC package.At the moment, there are 2 channels available.Total terminations are 8.Device DUAL is located at the terminal position.In total, there are 8 pins on it.A supply voltage of 5V can result in high efficiency.During operation, 8 pins are used.Power Management Circuits contains this gadget all by itself.Surface Mount is its direction of movement.Hot-swappable device is possible to maintain stable operation at a maximum temperature of 85°C°C.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.Hot-swappable device has a 5V power supply, which is the power supply used in the part.Analog IC POWER SUPPLY SUPPORT CIRCUIT is used in this gadget.During operation, it can supply a maximum current of 0.16mA.As a default, it's set to output 2.A maximum voltage of 5.5VV can be supplied to it.Using a low supply voltage, such as 3VV, will be feasible.There is 110mOhm resistance in the device.
SP2526A-2EN-L/TR Features
The terminal position of 8
SP2526A-2EN-L/TR Applications
There are a lot of Exar Corporation SP2526A-2EN-L/TR hot swap controllers applications.
- Reverse current protection
- DC boost circuit
- Distributed power systems
- Central office switching systems
- Raid
- Data communication systems
- PC board hot swap insertion and removal
- Circuit breakers for electronic circuits
- CompactPCI
- ISDN system