SNJ54S299J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | R-GDIP-T20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Family | S |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 21 ns |
| Power Supply Current-Max (ICC) | 225mA |
| fmax-Min | 50 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 5.08mm |
| Length | 24.195mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54S299J Overview
Embedded in a package of type CDIP, the device is available for use. A total of 20 terminations can be found on the chip. 5V is the operating supply voltage of the part. The electronic component belongs to the S. Taking note of the following additional details: HOLD MODE. This part must have a minimum supply voltage (Vsup) of 4.5V. A voltage of 5V is possible with this device. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. There are 8 bits on the IC chip. In total, it has 20 pins. There is a subcategory of it called Shift Registers. Temperatures higher than 125°C should not be used.
SNJ54S299J Features
It supplies 5V power
SNJ54S299J Applications
There are a lot of Texas Instruments SNJ54S299J Shift Registers applications.
- Serial to parallel converter
- Output expansion
- Remote control holding register
- Data manipulation
- Data Format Converters
- Delay Line
- Parallel to serial converter
- Parallel data
- 8-bit data storage
- Generate time delay toward digital circuits