SNJ54S299FK
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| JESD-30 Code | S-CQCC-N20 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -55°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 45pF |
| Number of Bits | 8 |
| Family | S |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Screening Level | MIL-PRF-38535 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 21 ns |
| Power Supply Current-Max (ICC) | 225mA |
| fmax-Min | 50 MHz |
| Count Direction | BIDIRECTIONAL |
| Height Seated (Max) | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 20 |
| Additional Feature | HOLD MODE |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
SNJ54S299FK Overview
20 is the total number of terminations on the chip. There is 5V operating supply voltage listed on the part. It is a component of the S. Additional aspects of this section include: HOLD MODE. For this part, Vsup should not be less than 4.5V. Voltage can be delivered at 5V. Ideally, the maximum supply voltage (Vsup) should not exceed 5.5V. There are 8 bits in the IC chip. 20 pins are on it. There is a subcategory of it called Shift Registers. Temperatures greater than 125°C should not be used.
SNJ54S299FK Features
It supplies 5V power
SNJ54S299FK Applications
There are a lot of Texas Instruments SNJ54S299FK Shift Registers applications.
- LED matrix control
- Serial-to-parallel data conversion
- Parallel data
- Sequence generator
- Remote control holding register
- Delay Line
- data manipulation
- Serial-to-parallel data conversion
- Serial to parallel converter
- Pattern Recognizers