SNJ54LS323FK
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Number of Pins | 20 |
| Packaging | Rail/Tube |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 39 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Max I(ol) | 0.024 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height | 2.03mm |
| Length | 8.89mm |
| Width | 8.89mm |
| Thickness | 1.83mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SNJ54LS323FK Overview
20 is the total number of terminations on the chip. The case Rail/Tube contains it. The part's operating supply voltage is rated 5V. On this part, there are 1 elements. 20 pins are present on the device. Mounting by Surface Mount is recommended. Electronic components fall under the category of LS. A range of 5V is noted as the operating supply voltage of this chip. Additional aspects of this section include: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. Voltage can be delivered at 5V by the device. There are 8 bits in the IC chip. It has a total of 20 pins. It is recommended that it be used at temperatures below 125°C. In order for this device to function, the value should not be less than -55°C. A voltage of 5.5V is used to supply this voltage. It is necessary to use a voltage that is higher than 4.5V to provide this supply.
SNJ54LS323FK Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SNJ54LS323FK Applications
There are a lot of Texas Instruments SNJ54LS323FK Shift Registers applications.
- LED matrix control
- Data manipulation
- Serial-to-parallel data conversion
- store data in digital form
- temporary data storage
- Data Processors
- Interconnectors
- Remote control holding register
- Counter
- Serial-to-parallel data conversion