SN75HVD08P
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Technology | BICMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 75HVD08 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Nominal Supply Current | 16mA |
| Data Rate | 10Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | TRUE |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 35mV |
| Number of Transceivers | 1 |
| Receive Delay-Max | 70 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 40 ns |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75HVD08P Overview
The enhanced 8-DIP (0.300, 7.62mm) package makes it an excellent LED driver.Tube package is used to mount this receiver.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Through Hole-type PCB or development board.Power supply requirements for this differential driver are 3V~5.5V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.This ic receiver has been primarily designed for applications where the operating temperature is 0°C~70°C.Wide receiver can operate within the range of 5V supply voltages efficiently.Integrated into this wide receiver are 8 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.For more variants of this part, try searching with the base part number 75HVD08, which indicates the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Through Hole mounting techniques.It provided a 1-bit resolution capability with this ic receiver.There is usually a 1-bit resolution specified for this receiver when it is used.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There are 1 transceivers in total that this module isolated transceiver implements.
SN75HVD08P Features
Tube package
8 pin count
8 pins
SN75HVD08P Applications
There are a lot of Texas Instruments SN75HVD08P Drivers/Receivers/Transceivers applications.
- Wireless modems
- Wired telephone
- Clock radio
- AV receiver
- Cell phones
- Televisions
- Wireless interactive experience
- Mainframes, workstations or storage devices
- Remote controls
- Wireless projection application for conferences