SN75ALS176DR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Additional Feature | 3-STATE DRIVER OUTPUT AND RECEIVER INPUT |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Operating Supply Current | 30mA |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Data Rate | 35 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS176DR Overview
Due to the enhanced 8-SOIC (0.154, 3.90mm Width) package, this driver IC is excellent for driving common LEDs.Cut Tape (CT) package is used to mount this receiver.Since this is a Transceiver can transceiver, many solutions can use it for a variety of functions.PCB or development board with Surface Mount-type connectors can accommodate this wide receiver.In terms of power supply, this differential driver utilizes 4.75V~5.25V.During operation, this electronic part may have up to 1/1 eligible receivers/drivers.As its name implies, this ic receiver is designed for applications where 0°C~70°C is the operating temperature.Wide receiver can operate within the range of 5V supply voltages efficiently.Wide receiver has 8 terminations built in for driving or receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.Since the base part number 75ALS176 uniquely identifies the product type, temperature, package, etc., you can use it to find more variations.8-pin driver IC with improved power dissipation control.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a general rule, this receiver has a resolution of 1 bits that is usually specified.As a result of the design of this transceiver module, the input voltage supply is designed to operate at 5V.3 volts.There is a subcategory named Line Driver or Receivers for this rf transceiver module.IC5V is a high performance driver IC designed to work with a 5V power supply.It implements 1 transceivers in total.ICs with 3-STATE DRIVER OUTPUT AND RECEIVER INPUT functions also improve the overall stability and accuracy of signal management.It is capable of driving LEDs with a voltage of 30mA as the input voltage to this integrating circuit.In the case of input current exceeding 30mA, this can transceiver may malfunction.
SN75ALS176DR Features
Cut Tape (CT) package
8 pin count
8 pins
5V power supply
SN75ALS176DR Applications
There are a lot of Texas Instruments SN75ALS176DR Drivers/Receivers/Transceivers applications.
- VoIP phones
- Wireless transmission
- Precision geodetic measurement
- Wireless 3D game
- Servers
- Transmission stations
- Wireless projection application for conferences
- Ship
- WDM transmission
- Cell phones