SN75ALS176AP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Weight | 440.409842mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | 3-STATE DRIVER OUTPUT AND RECEIVER INPUT |
| Subcategory | Line Driver or Receivers |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 75ALS176 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Nominal Supply Current | 30mA |
| Data Rate | 35 Mbps |
| Output Characteristics | 3-STATE |
| Differential Output | YES |
| Output Polarity | COMPLEMENTARY |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 60mV |
| Number of Transceivers | 1 |
| Simplex/Duplex | Half Duplex |
| Supply Voltage1-Nom | 5V |
| High Level Input Current-Max | 0.00002A |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS176AP Overview
An excellent driver IC for common LEDs thanks to its enhanced 8-DIP (0.300, 7.62mm) package.In the Tube package, this receiver is mounted.Being a Transceiver can transceiver, this part has empowered many solutions to serve for a variety of applications.On any Through Hole-type PCB or development board, this wide receiver can be placed.This differential driver consumes 4.75V~5.25V for its power supplyIt is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a voltage range of 5V, this driver IC can operate efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.It is packaged with 8 pinouts that are market standard for this particular transceiver.75ALS176 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 8-pin.As a result of the ic receiver, the resolution of the driver was increased to 1 bits.In most cases, the receiver will be specified with a 1-bit resolution.There is a supply voltage of 5V on the input of this transceiver module, so it can be operated from that source.A rf transceiver module named Line Driver or Receivers belongs to this subcategory.There is one driver IC in this package which is intended to be operated by 5V of power.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.A 3-STATE DRIVER OUTPUT AND RECEIVER INPUT function is also included on this optical transceiver module, which improves the overall signal management accuracy and stability.
SN75ALS176AP Features
Tube package
8 pin count
8 pins
5V power supply
SN75ALS176AP Applications
There are a lot of Texas Instruments SN75ALS176AP Drivers/Receivers/Transceivers applications.
- Structural bonding
- AV receiver
- Shortwave receiver
- Fast Ethernet
- Copper connection network
- Sensor reporting
- Tuner
- High-speed computer links
- Interconnection between switches and computers
- Single to Multimode Fiber Conversion