SN75ALS160DW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 537.308512mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BIPOLAR |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Base Part Number | 75ALS160 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Operating Supply Current | 80mA |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Propagation Delay | 20 ns |
| Differential Output | NO |
| Output Polarity | TRUE |
| Protocol | IEEE 488 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 8/8 |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 48mA |
| Receiver Number of Bits | 8 |
| Duplex | Half |
| Receiver Hysteresis | 650mV |
| Number of Drivers | 8 |
| Number of Transceivers | 1 |
| ESD Protection | No |
| Supply Voltage1-Nom | 5V |
| Out Swing-Min | 2 V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75ALS160DW Overview
An excellent driver IC for common LEDs thanks to its enhanced 20-SOIC (0.295, 7.50mm Width) package.The Tube package contains this receiver.The Transceiver can transceiver technology has enabled this part to power many solutions for a variety of uses.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.75V~5.25V.This electronic part can have?up to 8/8 eligible receivers/drivers on the field at once.?Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.With a supply voltage range of 5V, this line driver ic operates efficiently.20 terminations are integrated into this wide receiver for driving and receiving signals from data.A package consisting of 20 market standard pinouts is provided with this integrated circuit.75ALS160 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.An enhanced power dissipation control driver IC featuring 20 pins.Package size is drastically reduced by downsizing ICs and mounting them in high-density Surface Mount arrays.There is typically a resolution of 8 bits specified with this receiver.There is a voltage input supply of 5V required for the operation of this integrated circuit.Regarding the number of transceiver this module isolated transceiver implements, there are 1 transceivers overall.Embedded 8 drivers are included on the integrator circuit.It is capable of driving LEDs with a voltage of 80mA as the input voltage to this integrating circuit.When the input current reaches or exceeds 80mA, this can transceiver could have mal-functions.
SN75ALS160DW Features
Tube package
20 pin count
20 pins
SN75ALS160DW Applications
There are a lot of Texas Instruments SN75ALS160DW Drivers/Receivers/Transceivers applications.
- Wireless HD Photography
- Indoor ad hoc meeting
- Satellite communication
- SONET/SDH Network
- Low power, low voltage systems
- Switches
- Remote controls
- IPTV front end
- Single fiber bidirectional application
- Transmission stations