SN75107AN
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Receiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ADDITIONAL COMMON STROBE INPUT |
| Technology | BIPOLAR |
| Voltage - Supply | ±4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | SN75107 |
| Pin Count | 14 |
| Number of Channels | 2 |
| Operating Supply Current | 30mA |
| Power Dissipation | 1.15W |
| Output Characteristics | TOTEM-POLE |
| Differential Output | NO |
| Output Polarity | TRUE |
| Input Characteristics | DIFFERENTIAL |
| Max Dual Supply Voltage | 5.25V |
| Number of Drivers/Receivers | 0/2 |
| Min Dual Supply Voltage | 4.75V |
| Dual Supply Voltage | 5V |
| Receiver Number of Bits | 2 |
| Interface Standard | GENERAL PURPOSE |
| Negative Supply Voltage-Nom | -5V |
| Supply Voltage1-Nom | 5V |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN75107AN Overview
LED drivers benefit from this IC's enhanced 14-DIP (0.300, 7.62mm) package.The receiver is packaged in a Tube package.With its Receiver can transceiver design, this part can be incorporated into a wide range of solutions.You can place this wide receiver to any Through Hole-type PCB or development board.With respect to the power supply, this differential driver uses ±4.75V~5.25V.During operation, this electronic part may have up to 0/2 eligible receivers/drivers.For applications where the operating temperature is 0°C~70°C, this ic receiver was designed primarily.Wide receiver can operate within the range of 5V supply voltages efficiently.This wide receiver has 14 terminations for driving and receiving data signals.It is packaged with 14 pinouts that are market standard for this particular transceiver.Since the part number SN75107 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation driver IC with 14 pins.The package size of this optical transceiver has been dramatically reduced by downsizing ICs and using high-density Through Hole mounting techniques.There are typically 2 bits of resolution specified in the specifications of this receiver.0 drivers are embedded on the integrator circuit.In addition, the optical transceiver module incorporates a ADDITIONAL COMMON STROBE INPUT function that improves the overall stability and accuracy of the signal management.With an input voltage of 30mA, this integrating circuit has the ability to drive LEDs with an output voltage of 30mA.It is recommended to keep the operating temperature of the line driver ic above -5V.This optical transceiver consists of a total of 2 channels embedded in it.As part of the design, this line driver integrator circuit has a dual supply voltage arrangement with a maximum of 5.25V.A power supply applcan transceiverable for 4.75V output is recommended when dealing with this can transceiver's dual supply voltage.
SN75107AN Features
Tube package
14 pin count
14 pins
2 channels
SN75107AN Applications
There are a lot of Texas Instruments SN75107AN Drivers/Receivers/Transceivers applications.
- Aircraft positioning
- Copper connection network
- Clock radio
- Desktop PC
- Desktop radio
- transmission relay
- Metro access rings
- Wireless smart house
- Pocket PC
- Interconnection between switches and computers