SN74LVTH574IPWREP
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 3 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVTH574IPWREP Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. A 2.7V~3.6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. JK flip flop is a part of the 74LVTHseries of FPGAs. You should not exceed 150MHzin its output frequency. A total of 1elements are present in it. As a result, it consumes 190μA of quiescent current without being affected by external factors. There have been 20 terminations. You can search similar parts based on 74LVTH574. An input voltage of 3.3Vpowers the D latch. JK flip flop input capacitance is 3pF farads. In this case, the D flip flop belongs to the LVTfamily. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. Flip flops designed with 8bits are used in this part. In this case, the maximum supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be maintained above 2.7V for normal operation. Considering its reliability, this T flip flop is well suited for TR. The D flip flop is embedded with 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. In addition to its maximum design flexibility, the output current of the T flip flop is 64mA. As of now, there are 8input lines.
SN74LVTH574IPWREP Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
SN74LVTH574IPWREP Applications
There are a lot of Texas Instruments SN74LVTH574IPWREP Flip Flops applications.
- Dynamic threshold performance
- Consumer
- Latch-up performance
- Digital electronics systems
- Data transfer
- Shift registers
- Buffer registers
- QML qualified product
- Guaranteed simultaneous switching noise level
- Counters