SN74LVTH373DBR
| Parameters | |
|---|---|
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 3.9 ns |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 2.6 ns |
| Turn On Delay Time | 2.7 ns |
| Family | LVT |
SN74LVTH373DBR Overview
20-SSOP (0.209, 5.30mm Width) contains it. It is packaged in the way of Cut Tape (CT). The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. This electronic part is mounted in the way of Surface Mount. A voltage of 2.7V~3.6V is used as the supply voltage for this device. The operating temperature is -40°C~85°C. The 74LVTH series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 8 bits. A device such as this has 20 terminations designed. The family 74LVTH373 includes it. A 3.3V voltage supply is required for operation. The device is equipped with 20 pins. This electronic device is categorized as a LVT electronic device. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. Subcategory FF/Latches includes this part. When Vsup reaches 3.6V, the maximal supply voltage is reached. In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. The 64mA output current gives it maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. Maximum power supply (ICC) for its operation is 5mA.
SN74LVTH373DBR Features
20-SSOP (0.209, 5.30mm Width) package
74LVTH series
8 Bits
74LVTH373 family
20 pin count
20 pins
SN74LVTH373DBR Applications
There are a lot of Texas Instruments SN74LVTH373DBR Latches applications.
- Watches
- Motor Drives
- PCs and Notebooks
- General-Purpose Register
- Instrumentation
- Digital bus buffer
- Automotive Infotainment
- Automotive Body Electronics
- Double bus register system
- Display