SN74LVCH16374ADL
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | 74LVCH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVCH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 6.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 150000000Hz |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~125°C TA |
SN74LVCH16374ADL Overview
48-BSSOP (0.295, 7.50mm Width)is the packaging method. You can find it in the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates at 1.65V~3.6Vvolts. Currently, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74LVCH series. Its output frequency should not exceed 150MHz. The list contains 2 elements. As a result, it consumes 20μA quiescent current and is not affected by external forces. The number of terminations is 48. It is a member of the 74LVCH16374 family. Power is provided by a 1.8V supply. A JK flip flop with a 5pFfarad input capacitance is used here. It belongs to the family of electronic devices known as LVC/LCX/Z. Surface Mount mounts this electronic component. This board is designed with 48pins on it. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The flip flop is designed with 16bits. Normal operation requires a supply voltage (Vsup) above 1.65V. This D flip flop is equipped with 0 ports. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. To operate, the chip has a total of 3 output lines. It has 8lines.
SN74LVCH16374ADL Features
Tube package
74LVCH series
48 pins
16 Bits
SN74LVCH16374ADL Applications
There are a lot of Texas Instruments SN74LVCH16374ADL Flip Flops applications.
- Balanced Propagation Delays
- Memory
- Synchronous counter
- EMI reduction circuitry
- Load Control
- Set-reset capability
- Latch
- Computing
- Instrumentation
- Test & Measurement