SN74LVCC3245APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO REQUIRES 3V TO 5.5V SUPPLY FOR PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Output Type | Voltage |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.3V |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7.1 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 14.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 200 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 7.6 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | 3V & 3/5V |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVCC3245APWE4 Overview
Embedded in the TSSOP package, it is available for you to use.The package is in the form of Rail/Tube.This output uses Voltage.Usually, when a transmission line is terminated, there are 24 termination points used.Power comes from a voltage of 3.3V.There are 24 pins on this device.The pin configuration of the device is 24.There are 8 bits in this electronic part, which means it is designed in such a way.Level translators supports the maximal supply voltage of 5.5V.This device requires a minimum voltage of 2.3V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Channels are set to 1.Level translators is part of Bus Driver/Transceivers.Level translators uses a logic IC of type BUS TRANSCEIVER.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Level translators is part of the family of electronic devices called LVC/LCX/Z.Without external influence, it consumes 80μA of quiescent current.Power comes from a 3.3V supply.ALSO REQUIRES 3V TO 5.5V SUPPLY FOR PORT B are other characteristics of it.In order for the system to operate properly, the operating temperature should be higher than -40°C.Level translators is recommended to work at a temperature lower than 85°C.The output current of 24mA makes it feature maximum design flexibility.
SN74LVCC3245APWE4 Features
TSSOP package
24 pin count
24 pins
3.3V power supplies
SN74LVCC3245APWE4 Applications
There are a lot of Texas Instruments SN74LVCC3245APWE4 voltage translators & level shifters applications.
- Electronic Points of Sale
- Debouncing a mechanical switch
- I2C / SMBus
- Tablet
- Personal computing
- Eliminate Slow or Noisy Input Signals
- Enterprise and communications
- Temperature Ranges (1)
- Notebook
- Available in Military (–55°C/125°C) Temperature Range