SN74LVC823ADW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.9 ns |
| Turn On Delay Time | 1.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC823ADW Overview
The flip flop is packaged in 24-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. It is configured with a trigger that uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 1.65V~3.6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74LVCseries comprises this type of FPGA. You should not exceed 150MHzin its output frequency. In total, it contains 1 elements. This process consumes 10μA quiescents. Terminations are 24. The object belongs to the 74LVC823 family. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 5pF farads. LVC/LCX/Zis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. A total of 24pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. Flip flops designed with 9bits are used in this part. There are 2 ports embedded in the flip flops. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. In order to operate, the chip has 3 output lines. It is reported that there are 9 input lines. WITH CLEAR AND CLOCK ENABLEis also one of its characteristics.
SN74LVC823ADW Features
Tube package
74LVC series
24 pins
9 Bits
SN74LVC823ADW Applications
There are a lot of Texas Instruments SN74LVC823ADW Flip Flops applications.
- Frequency Dividers
- Buffer registers
- Functionally equivalent to the MC10/100EL29
- Pattern generators
- Counters
- Data storage
- Asynchronous counter
- ESD protection
- Patented noise
- Balanced Propagation Delays