SN74LVC823ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LVC823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 9 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8.9 ns |
| Turn On Delay Time | 1.3 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 8ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 8 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC823ADGVR Overview
The item is packaged in 24-TFSOP (0.173, 4.40mm Width)cases. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 1.65V~3.6V. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74LVCseries of FPGAs. You should not exceed 150MHzin the output frequency of the device. A total of 1 elements are present. As a result, it consumes 10μA of quiescent current without being affected by external factors. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74LVC823 family contains it. A voltage of 1.8V is used as the power supply for this D latch. Its input capacitance is 5pFfarads. Devices in the LVC/LCX/Zfamily are electronic devices. In this case, the electronic component is mounted in the way of Surface Mount. The 24pins are designed into the board. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 9 Bits. A reliable performance of this D flip flop makes it well suited for use in TR. There are 2 ports embedded in the flip flops. With a current output of 24mA , it offers maximum design flexibility. It operates with 3 output lines. This input has 9lines. Furthermore, it has WITH CLEAR AND CLOCK ENABLEas a characteristic.
SN74LVC823ADGVR Features
Tape & Reel (TR) package
74LVC series
24 pins
9 Bits
SN74LVC823ADGVR Applications
There are a lot of Texas Instruments SN74LVC823ADGVR Flip Flops applications.
- Data transfer
- Functionally equivalent to the MC10/100EL29
- Digital electronics systems
- 2 – Bit synchronous counter
- Clock pulse
- Synchronous counter
- Convert a momentary switch to a toggle switch
- Guaranteed simultaneous switching noise level
- Latch
- Parallel data storage