SN74LVC821APWRE4

SN74LVC821APWRE4

Flip Flop DUAL 24 Pins TSSOP


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-SN74LVC821APWRE4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 402
  • Description: Flip Flop DUAL 24 Pins TSSOP(Kg)

Details

Tags

Parameters
Control Type INDEPENDENT CONTROL
Number of Output Lines 3
Count Direction UNIDIRECTIONAL
Clock Edge Trigger Type Positive Edge
Translation N/A
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Package / Case TSSOP
Number of Pins 24
Weight 89.499445mg
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Terminal Pitch 0.65mm
Frequency 150MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 24
Qualification Status Not Qualified
Number of Elements 1
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 3.6V
Min Supply Voltage 1.65V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Propagation Delay 8.5 ns
Turn On Delay Time 2.2 ns
Family LVC/LCX/Z
Logic Function D-Type, Flip-Flop
Logic IC Type BUS DRIVER
Number of Bits per Element 10
High Level Output Current -24mA
Low Level Output Current 24mA

SN74LVC821APWRE4 Overview


TSSOPis the packaging method. As part of the package Tape & Reel (TR), it is embedded. In total, it contains 1 elements. Terminations are 24. Power is provided by a 1.8V supply. The electronic device belongs to the LVC/LCX/Zfamily. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 24pins on it. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. The superior flexibility of this circuit is achieved by using 8 circuits. Considering the reliability of this T flip flop, it is well suited for TR. A total of 2ports are embedded in the D flip flop. It has 3 output lines to operate. -24mA is set as the high level output current. In the low level output current setting, the current is set to 24mA. It is recommended that the operating temperature be below 85°C. The operating temperature should be higher than -40°C. Normally, it operates with a voltage of 1.65VV as its minimum supply voltage. It supports a maximum supply voltage of 3.6V volts. 150MHzis the maximum frequency that can be achieved. It uses a logic IC with a BUS DRIVER value. The T flip flop is equipped with 1functions . With 24 pins, it is equipped with a low power consumption. As a result of its output current of 24mA, it is very flexible in terms of design.

SN74LVC821APWRE4 Features


Tape & Reel (TR) package
24 pins
1 Functions
24 pin count

SN74LVC821APWRE4 Applications


There are a lot of Texas Instruments SN74LVC821APWRE4 Flip Flops applications.

  • Event Detectors
  • Supports Live Insertion
  • Cold spare funcion
  • Modulo – n – counter
  • Reduced system switching noise
  • Frequency Divider circuits
  • Automotive
  • Differential Individual
  • Divide a clock signal by 2 or 4
  • Bounce elimination switch

Write a review

Note: HTML is not translated!
    Bad           Good