SN74LVC74APWR
| Parameters | |
|---|---|
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 1.8V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 50mA |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 1 ns |
| Family | LVC/LCX/Z |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
SN74LVC74APWR Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). A package named Cut Tape (CT)includes it. T flip flop uses Differentialas the output. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 1.65V~3.6V is required for operation. It is operating at a temperature of -40°C~125°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74LVCseries of FPGAs. A frequency of 150MHzshould not be exceeded by its output. The number of terminations is 14. The 74LVC74family includes it. Power is provided by a 1.8V supply. A 5pFfarad input capacitance is provided by this T flip flop. Devices in the LVC/LCX/Zfamily are electronic devices. There is an electronic part that is mounted in the way of Surface Mount. This board has 14 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Using 2 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. It operates from 3.3V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 1.8V. The 50mA output current allows it to be designed with the greatest amount of flexibility. It operates with 1 output lines. It consumes a total of 10μA quiescent current at any given time.
SN74LVC74APWR Features
Cut Tape (CT) package
74LVC series
14 pins
3.3V power supplies
SN74LVC74APWR Applications
There are a lot of Texas Instruments SN74LVC74APWR Flip Flops applications.
- ESCC
- Count Modes
- ATE
- QML qualified product
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Frequency division
- Computers
- Test & Measurement
- Set-reset capability