SN74LVC573ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 60.186038mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74LVC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 6.9 ns |
| Turn On Delay Time | 2 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC573ADGVR Overview
20-TFSOP (0.173, 4.40mm Width) contains it. Cut Tape (CT) is the packaging method. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. With a supply voltage of 1.65V~3.6V, it operates. It operates at -40°C~85°C degrees Celsius. 74LVC is the series number of this FPGA. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74LVC573. With the supply voltage set at 3.3V, it is able to operate. 20 pins are available on it. LVC/LCX/Z is the family name of this electronic device. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. It consists of 3 input lines from which an electronic circuit can be built. Based on its reliable performance, this device is well suited to TR. Due to its 24mA output current, it offers maximum design flexibility.
SN74LVC573ADGVR Features
20-TFSOP (0.173, 4.40mm Width) package
74LVC series
8 Bits
74LVC573 family
20 pin count
20 pins
SN74LVC573ADGVR Applications
There are a lot of Texas Instruments SN74LVC573ADGVR Latches applications.
- Shift right with parallel loading
- Synchronous frequency dividers
- Hammer Device Information
- Avionics
- Motor Drives
- Up/down difference counting
- Programmable binary
- A/D and D/A conversion
- Automotive ADAS
- Up-Down Johnson