SN74LVC4245APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 5V SUPPLY FOR PORT A; 3.3V SUPPLY FOR PORT B |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Output Type | Voltage |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 9.8 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 9.8 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Prop. Delay@Nom-Sup | 6.7 ns |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | 3V & 5V |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVC4245APWE4 Overview
In the package TSSOP, it can be found.Rail/Tube is the packaging method.Level translators uses Voltage as the output.In order to achieve its superior flexibility, 8 circuits are used.Transmission lines are terminated using 24 terminations.This device is powered by a supply voltage of 3.3V which is applied to it.24 pins are present on this board.The 24 pins are designed into it.There are 8 bits in this electronic part.The maximum supply voltage is 5.5V.A minimal voltage of 2.7V is needed to operate it.Level translators has been mounted wLevel translatorsh the method of Surface Mount.In Bus Driver/Transceivers, you will find this part.The logic IC it adopts is BUS TRANSCEIVER.2 terminations end transmission lines with devices that match their characteristic impedance, which can either be a resistance or an inductor.In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z.Level translators consumes 80μA of quiescent current wLevel translatorshout being affected by external factors. 3.3V power supplies are required to run it.Also, 5V SUPPLY FOR PORT A; 3.3V SUPPLY FOR PORT B characterize it.Temperatures above -40°C are recommended.There should be a temperature below 85°C at which the system is operating.This device has a total of 1 elements.Due to its 24mA output current, this device offers maximum design flexibility.
SN74LVC4245APWE4 Features
TSSOP package
8 circuits
24 pin count
24 pins
3.3V power supplies
1 elements
SN74LVC4245APWE4 Applications
There are a lot of Texas Instruments SN74LVC4245APWE4 voltage translators & level shifters applications.
- Routers (routing equipment)
- One Assembly
- Enterprise and communications
- Available in Military (-55°C to 125°C)
- Notebook
- Telematics
- Infotainment Head Unit
- LCD Panels Using GIP / GOA / ASG Technology
- Controlled Baseline
- Temperature Ranges (1)