SN74LVC373APWE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 8.7 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC373APWE4 Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. It is packaged in the way of Tube. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A 1.65V~3.6V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. The 74LVC series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. A device with this design has 20 terminations. This type belongs to the 74LVC373 family. It operates with a supply voltage of 1.8V. It has 20 pins that makes it easy to use. It is part of the family of electronic devices called LVC/LCX/Z. The 20 pins are designed into it. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. It belongs to the subcategory of FF/Latches. 3.6V is the maximum supply voltage (Vsup). 3.3V power supplies are needed to operate it. It consists of 8 input lines from which an electronic circuit can be built. It features maximum flexibility in design due to 24mA output current.
SN74LVC373APWE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373APWE4 Applications
There are a lot of Texas Instruments SN74LVC373APWE4 Latches applications.
- Lamp and Display (LED)
- Hammer
- Parallel Input
- Ring counter
- Shift right with parallel loading
- Pattern generators
- Multistage ripple counting
- Network Switches
- Communication systems
- Multi-line decoders