SN74LVC2G66YEPR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-XBGA-B8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.9ns, 6.3ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -58dB @ 1MHz |
| Switch-on Time-Max | 5.6ns |
| Switch-off Time-Max | 6.9ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Length | 1.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74LVC2G66YEPR Overview
As the electronic part is packed in 8-XFBGA, DSBGA, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~85°C TA. In total, 8 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. A 2.3V voltage supply should turn on and run the electronic component. As part of its design, the 8 series is equipped with this electronic component. Circuits based on SPST - NO switching are used to construct these analog switch ics. A total of 2 circuits make up this switch device. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply.
SN74LVC2G66YEPR Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
SN74LVC2G66YEPR Applications
There are a lot of Rochester Electronics, LLC SN74LVC2G66YEPR Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Power routing
- Video switching
- E1 Network Equipment
- Medical
- Audio and video switching
- Multiplexers
- Automatic test equipment
- Channelized and Unchannelized DS3 applications