SN74LVC1G79QDCKTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC1G79 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 32mA 32mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
SN74LVC1G79QDCKTQ1 Overview
It is embeded in 5-TSSOP, SC-70-5, SOT-353 case. There is an embedded version in the package Tape & Reel (TR). There is a Non-Invertedoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. A supply voltage of 1.65V~5.5V is required for operation. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the Automotive, AEC-Q100, 74LVCseries contain this type of chip. A frequency of 160MHzshould be the maximum output frequency. The list contains 1 elements. As a result, it consumes 10μA quiescent current. There are 5 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. JK flip flop belongs to 74LVC1G79 family. A voltage of 3.3V is used to power it. Its input capacitance is 4pFfarads. LVC/LCX/Zis the family of this D flip flop. As you can see from the design, it has pins with 5. Flip flops designed with 1bits are used in this part. In view of its reliability, this D flip flop is a good fit for TR.
SN74LVC1G79QDCKTQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
5 pins
1 Bits
SN74LVC1G79QDCKTQ1 Applications
There are a lot of Texas Instruments SN74LVC1G79QDCKTQ1 Flip Flops applications.
- Latch-up performance
- Balanced 24 mA output drivers
- Frequency Divider circuits
- Computers
- Supports Live Insertion
- Data Synchronizers
- Reduced system switching noise
- 2 – Bit synchronous counter
- Test & Measurement
- Pattern generators