SN74LVC1G66YEAR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-XFBGA, DSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 5 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 5 |
| JESD-30 Code | R-XBGA-B5 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Switch-on Time-Max | 6.5ns |
| Switch-off Time-Max | 6.9ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | Non-RoHS Compliant |
SN74LVC1G66YEAR Overview
Shipping overseas is convenient due to the electrical component's packing in 5-XFBGA, DSBGA. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. In Surface Mount, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. In total, there are 5 terminations. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. As part of the design of the 5 series, this electronic part has been incorporated into the system. A SPST - NO switching circuit is used for these analog switches. There are 1 circuits in this multiplexer. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply.
SN74LVC1G66YEAR Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
SN74LVC1G66YEAR Applications
There are a lot of Rochester Electronics, LLC SN74LVC1G66YEAR Analog Switches & Multiplexers ICs applications.
- SONET
- Transmit
- PBX interfaces
- Battery-powered systems
- Avionics test equipment
- Audio signal routing
- PDAs
- HDTV
- Cable PC
- Cell phones