SN74LVC1G66DSF2
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 10Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.35mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC1G66 |
| Pin Count | 6 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | SPDT |
| Bandwidth | 300MHz |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 58 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| On-state Resistance Match-Nom | 12Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Normal Position | NC |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 350μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1G66DSF2 Overview
The electronic component is convenient to ship overseas because it is packed in a 6-XFDFN. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 6 terminations. Due to its 1 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. Into the electrical component body are injected 6 pins. The analog switch ics are built using SPST - NO switching circuits. Search with 74LVC1G66 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 10Ohm. You can find the functions of the 6 pins in the datasheets. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. With a SPDT analog IC integrated into the board. 300MHz-bandwidths can be used to transfer data between multiplexers.
SN74LVC1G66DSF2 Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
Bandwidth: 300MHz
SN74LVC1G66DSF2 Applications
There are a lot of Texas Instruments SN74LVC1G66DSF2 Analog Switches & Multiplexers ICs applications.
- Industrial
- Power routing
- Fault Tolerant Systems
- Cable PC
- ATM
- Microprocessor controlled systems
- Remote wireless modules
- Medical
- Battery Powered Systems
- Audio and video switching