SN74LVC16374AGQLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.796911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVC16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 150MHz |
| Propagation Delay | 4.9 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 4.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 7mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC16374AGQLR Overview
In the form of 56-VFBGA, it has been packaged. The Cut Tape (CT)package contains it. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. A 1.65V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LVCseries FPGA. It should not exceed 150MHzin terms of its output frequency. D latch consists of 2 elements. T flip flop consumes 20μA quiescent energy. Terminations are 56. Members of the 74LVC16374family make up this object. Power is provided by a 1.8V supply. This T flip flop has a capacitance of 5pF farads at the input. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 56 pins. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. There are 16bits in this flip flop. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The JK flip flop is with 1 output lines to operate. It is reported that there are 3 input lines.
SN74LVC16374AGQLR Features
Cut Tape (CT) package
74LVC series
56 pins
16 Bits
SN74LVC16374AGQLR Applications
There are a lot of Texas Instruments SN74LVC16374AGQLR Flip Flops applications.
- Set-reset capability
- Data storage
- Shift registers
- Parallel data storage
- ESCC
- Guaranteed simultaneous switching noise level
- Computers
- Common Clocks
- Patented noise
- Power down protection