SN74LVC16373ADL
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74LVC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 4.2 ns |
| Turn On Delay Time | 2.1 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Number of Input Lines | 16 |
| Independent Circuits | 2 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC16373ADL Overview
A package called 48-BSSOP (0.295, 7.50mm Width) contains it. It is packaged in the way of Tube. It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. A 1.65V~3.6V voltage supply is required for operation. There is -40°C~85°C operating temperature. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. As far as this device is concerned, it has no terminations. The family it belongs to is 74LVC16373. It operates with a supply voltage of 1.8V. There are 48 pins on it. It is a member of the LVC/LCX/Z family of electronic devices. It is designed with 48 pins. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 3.6V. It operates from 3.3V power supplies. A voltage greater than 1.65V must be supplied as a power supply (Vsup). Electronic circuits are represented by 16 input lines. With 24mA, maximum design flexibility is ensured.
SN74LVC16373ADL Features
48-BSSOP (0.295, 7.50mm Width) package
74LVC series
8 Bits
74LVC16373 family
48 pin count
48 pins
3.3V power supplies
SN74LVC16373ADL Applications
There are a lot of Texas Instruments SN74LVC16373ADL Latches applications.
- Pattern generators
- Shift Registers
- Parallel Input
- Automotive ADAS
- Ring counter
- Control circuits
- Synchronous frequency dividers
- Flip-flops
- Parallel-to-Serial Data Conversion
- Parallel data storage