Parameters |
Number of Outputs |
9 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Temperature Grade |
INDUSTRIAL |
Supply Voltage-Min (Vsup) |
3V |
Family |
LV/LV-A/LVX/H |
Logic Function |
Shift Register |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
Logic IC Type |
SERIAL IN PARALLEL OUT |
Number of Bits per Element |
8 |
Trigger Type |
POSITIVE EDGE |
Count Direction |
RIGHT |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
20 |
Weight |
76.997305mg |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Pin Count |
20 |
SN74LV8153PWRE4 Overview
The device is embedded in TSSOP package. It sums up to 20 where the chip's terminations add up. Tape & Reel (TR) is the case in which it is packed. 3.3V is the part's operating supply voltage. A total of 1 elements can be found on this part. There are 20 pins on the device. It is recommended to mount by Surface Mount in order to get the best results. It is a component of the LV/LV-A/LVX/H. According to the specification, this chip's operating supply voltage falls within the range of 5V. Ensure that Vsup is not less than 3V when powering this part. 20 pins are on it. This product should not be used at temperatures above 85°C. Ideally, it should not fall below -40°C. This part has 9 outputs built in to it.
SN74LV8153PWRE4 Features
With 20 pins
Operate supply voltage at 5V
SN74LV8153PWRE4 Applications
There are a lot of Texas Instruments SN74LV8153PWRE4 Shift Registers applications.
- Serial-to-parallel data conversion
- Data manipulation
- Serial-to-parallel data conversion
- data transfer
- Generate time delay toward digital circuits
- Pseudo Random Pattern Generator
- Delay Line
- LED matrix control
- Flash Memory
- Parallel data