SN74LV595APWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV595APWRE4 Overview
Embedded in a package of type TSSOP, the device is available for use. There are 16 terminations on the chip. It is packed in a case number Tape and Reel. This part has an operating supply voltage of 2.5V. There are 16 pins on the device. Surface Mount is recommended for mounting. This electronic component is classified as LV/LV-A/LVX/H. The following additional aspects of this section are worth noting: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. In the device, there are 1 input lines. There is a capability to deliver voltage at 3.3V. There are 8 bits in the IC chip. In total, there are 16 pins on it. Under 85°C, it is recommended that it be used. In order to operate the device, the value should not fall below -40°C. It is used under the 5.5V supply voltage. A voltage higher than 2V is used as a supply voltage. It is necessary to operate 9 output lines.
SN74LV595APWRE4 Features
With 16 pins
It supplies 3.3V power
With 9 output lines
SN74LV595APWRE4 Applications
There are a lot of Texas Instruments SN74LV595APWRE4 Shift Registers applications.
- Delay Line
- Interconnectors
- Pattern Recognizers
- Dual-rank shift, hold, and bus applications
- data transfer
- 7-segment display control
- Parallel data
- Parallel to serial converter
- Data Format Converters
- Remote control holding register