SN74LV595APWR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 170MHz |
| Base Part Number | 74LV595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Max Input Current | 1μA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV595APWR Overview
This device can be found embedded within the package 16-TSSOP (0.173, 4.40mm Width). It sums up to 16 where the chip's terminations add up. Tape & Reel (TR) is the case in which it is packed. There is 2.5V operating supply voltage listed on the part. It is a part that has 1 elements on it. 16 pins are provided on the device. Mounting by Surface Mount is recommended. There is an electronic component in the LV/LV-A/LVX/H. Its mounting method is Surface Mount. -40°C~85°C is the operating temperature range. Votage within the range of 2V~5.5V is supplied. The 74LV series is associated with this electrical component. If you use the 74LV595 family, you can find parts that are similar. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. This part should have a minimum supply voltage (Vsup) of at least 2V. Devices with voltage delivery capabilities of 3.3V are available. A maximum supply voltage (Vsup) of 5.5V may be applied to this part. Operation is available on only 9 output lines. TR is used to package the part. 170MHz is the frequency at which this device operates.
SN74LV595APWR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
It supplies 3.3V power
With 9 output lines
Packing Method : TR
SN74LV595APWR Applications
There are a lot of Texas Instruments SN74LV595APWR Shift Registers applications.
- Parallel to serial converter
- Serial-to-parallel data conversion
- 8-bit data storage
- Data Format Converters
- ROM Chips
- Sequence generator
- Flash Memory
- Dual-rank shift, hold, and bus applications
- 7-segment display control
- Generate time delay toward digital circuits