SN74LV595ADR
| Parameters | |
|---|---|
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LV595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 25.5 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
SN74LV595ADR Overview
The device is embedded in 16-SOIC (0.154, 3.90mm Width) package. It sums up to 16 where the chip's terminations add up. The case Tape & Reel (TR) contains it. Its operating supply voltage is rated at 2.5V. A total of 1 elements can be found on this part. 16 pins are provided on the device. Surface Mount is recommended for mounting. This electronic component is classified as LV/LV-A/LVX/H. Surface Mount is the way in which this component is mounted. There is a range of operating temperatures -40°C~85°C. It is supplied with voltage within 2V~5.5V. The 74LV series is associated with this electrical component. Based on the 74LV595 family, you can search for similar parts. Additional aspects of this section are as follows: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, Vsup should not be less than 2V. A voltage of 3.3V can be delivered by it. A maximum supply voltage (Vsup) of 5.5V may be applied to this part. Operation is available on only 9 output lines. TR is used to package the part.
SN74LV595ADR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
It supplies 3.3V power
With 9 output lines
Packing Method : TR
SN74LV595ADR Applications
There are a lot of Texas Instruments SN74LV595ADR Shift Registers applications.
- Output expansion
- Sequence generator
- Data manipulation
- LED matrix control
- 8-bit data storage
- Delay Line
- Cache memory in CPU
- Serial-to-parallel data conversion
- store data in digital form
- Parallel data