SN74LV595ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV595ADG4 Overview
The device is embedded in SOIC package. This chip has a total termination count of 16. The Rail/Tube case contains it. Voltage rating of the part is 2.5V. The part consists of 1 elements. 16 pins are available on the device. Surface Mount is recommended for mounting. This electronic component is classified as LV/LV-A/LVX/H. The operating supply voltage of this chip is noted to be within the range 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. It can deliver voltage at 3.3V. IC chips contain a total of 8 bits. The pin count is 16. At temperatures below 125°C, it is recommended for use. This device should not be operated below -40°C. It is employed under the condition of 5.5V. There is a voltage applied to the supply that is greater than 2V. A total of 9 output lines are available for operation.
SN74LV595ADG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
With 9 output lines
SN74LV595ADG4 Applications
There are a lot of Texas Instruments SN74LV595ADG4 Shift Registers applications.
- store data in digital form
- Pulse Extenders
- Parallel data
- LED matrix control
- temporary data storage
- Serial-to-parallel data conversion
- Parallel to serial converter
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Flash Memory