SN74LV594ADBRE4
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 19 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape and Reel |
SN74LV594ADBRE4 Overview
The device is embedded in SSOP package. There are 16 terminations on the chip. A Tape and Reel case holds it. A voltage of 2.5V is specified for the part's operating supply. A total of 1 elements are present on this part. 16 pins are located on the device. Using Surface Mount as a mount point is recommended. It is a component of the LV/LV-A/LVX/H. In terms of supply voltage, this chip operates within the range of 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED. The device is capable of delivering voltage at 3.3V. It has 8 bits in total. There are a total of 16 pins on it. The product should be used at temperatures below 85°C. This device should not be operated with a value lower than -40°C. This supply voltage is employed under 5.5V. It is important to note that this supply voltage is higher than 2V. There are 9 output lines to operate.
SN74LV594ADBRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
With 9 output lines
SN74LV594ADBRE4 Applications
There are a lot of Texas Instruments SN74LV594ADBRE4 Shift Registers applications.
- Cache memory in CPU
- 7-segment display control
- temporary data storage
- Parallel to serial converter
- Parallel data
- Sequence generator
- LED matrix control
- Flash Memory
- Remote control holding register
- Serial-to-parallel data conversion