SN74LV573ADBRG4
| Parameters | |
|---|---|
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 23 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
SN74LV573ADBRG4 Overview
Package 20-SSOP (0.209, 5.30mm Width) includes it. Packaged in the way of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. There is no supply voltage for this device. It is -40°C~85°C at the operating temperature. The 74LV series is associated with this FPGA. With this electronic part, there are 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. This type belongs to the 74LV573 family. The device is operated when the supply voltage is set to 2.5V. The device is equipped with 20 pins. LV/LV-A/LVX/H is the family of this electronic device. The pin configuration of the device is 20. This electronic part is mounted in the way of Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. When Vsup reaches 5.5V, the maximal supply voltage is reached. A total of 3.3V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 2V. There are 8 input lines in which electronic circuits are present. On the basis of its reliability, this device is well suited for TR. It features maximum flexibility in design due to 16mA output current. Maximum power supply (ICC) for its operation is 0.02mA.
SN74LV573ADBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV573 family
20 pin count
20 pins
3.3V power supplies
SN74LV573ADBRG4 Applications
There are a lot of Texas Instruments SN74LV573ADBRG4 Latches applications.
- Stacked or Push-Down Registers
- Up/down difference counting
- Hammer Device Information
- TV Set-top Boxes
- Programmable binary
- Four-bit storage with output enable
- Parallel Input
- Shift Registers
- Automotive Infotainment
- BCD counting