| Parameters |
| Factory Lead Time |
12 Weeks |
| Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
| Mount |
Surface Mount |
| Mounting Type |
Surface Mount |
| Package / Case |
16-SOIC (0.295, 7.50mm Width) |
| Number of Pins |
16 |
| Weight |
420.395078mg |
| Operating Temperature |
-40°C~105°C TA |
| Packaging |
Tape & Reel (TR) |
| Series |
Automotive, AEC-Q100 |
| JESD-609 Code |
e4 |
| Pbfree Code |
yes |
| Part Status |
Active |
| Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
| Number of Terminations |
16 |
| ECCN Code |
EAR99 |
| Resistance |
75Ohm |
| Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory |
Multiplexer or Switches |
| Technology |
CMOS |
| Terminal Position |
DUAL |
| Terminal Form |
GULL WING |
| Peak Reflow Temperature (Cel) |
260 |
| Number of Functions |
1 |
| Supply Voltage |
2.3V |
| Base Part Number |
74LV4051 |
| Output |
SEPARATE OUTPUT |
| Pin Count |
16 |
| Power Supplies |
3.3V |
| Number of Channels |
8 |
| Number of Circuits |
1 |
| Max Supply Voltage |
5.5V |
| Min Supply Voltage |
2V |
| Operating Supply Current |
20μA |
| Propagation Delay |
7 ns |
| Turn On Delay Time |
20 ns |
| Logic Function |
Demultiplexer, Multiplexer |
| Number of Inputs |
8 |
| Supply Type |
Single |
| Bandwidth |
35MHz |
| Supply Current-Max (Isup) |
0.02mA |
| Turn-Off Delay Time |
20 ns |
| On-State Resistance (Max) |
75Ohm |
| Multiplexer/Demultiplexer Circuit |
8:1 |
| Off-state Isolation-Nom |
45 dB |
| Current - Leakage (IS(off)) (Max) |
100nA |
| Channel Capacitance (CS(off), CD(off)) |
0.5pF 23.4pF |
| On-state Resistance Match-Nom |
2.1Ohm |
| Switch Time (Ton, Toff) (Max) |
14ns, 14ns |
| Channel-to-Channel Matching (ΔRon) |
1.3 Ω |
| Switch-on Time-Max |
25ns |
| Switch-off Time-Max |
25ns |
| Voltage - Supply, Single (V+) |
2V~5.5V |
| Signal Current-Max |
0.05A |
| Height |
2.65mm |
| Length |
10.3mm |
| Width |
7.5mm |
| Thickness |
2.35mm |
| Radiation Hardening |
No |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Lead Free |
SN74LV4051ATDWRQ1 Overview
The electrical component comes in 16-SOIC (0.295, 7.50mm Width) packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~105°C TA. Totally, there are 16 terminations. Due to its 8 channels, the electrical component produces high-quality output. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. This electrical component is included in the 16 series of products. Circuits number 1 make up this analogue multiplexer. Use 74LV4051 to search for variants of the digital switches. An switch multiplexer with 75Ohm internal resistance has a value of 75Ohm. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. For this multiplexer to operate, 20μA current would be sufficient. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. It is possible to operate 8 inputs. The data can be transferred over a wide range of bandwidths, called 35MHz bandwidths. From the Automotive, AEC-Q100 series.
SN74LV4051ATDWRQ1 Features
8 Channels
20μA Supply Current
Bandwidth: 35MHz
SN74LV4051ATDWRQ1 Applications
There are a lot of Texas Instruments SN74LV4051ATDWRQ1 Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- PBXs
- Cellular phones
- Sample-and-hold systems
- Communication systems
- USB 1.1 signal switching circuits
- PDH Multiplexers
- Battery Powered Instruments
- Cross Connects
- Transmit