SN74LV393APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 150MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 32 ns |
| Turn On Delay Time | 32 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Unidirectional |
| Max I(ol) | 0.006 A |
| fmax-Min | 105 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV393APWE4 Overview
TSSOPis a package in which this device is packaged. This configuration uses 14terminations. Having a supply voltage of 2.5V enables to operate in a fully flexible manner. In this diagram, there are 2elements that are interconnected by wires. There are a total of 14 pins in all components. There are 14 pins going on to connect other parts in the circuit. Using [0], it can be mounted. It emerges as a member of LV/LV-A/LVX/H family. The device contains 4bits of information. Based on the Pbfree code, the result may be yes. There is a temperature grade of INDUSTRIALon this device. In order to package it, TUBEis employed. There is 3.3V voltage comes from the voltage source. It operates at the maximum temperature of 85°C for extended periods of time with acceptable stability of its electrical characteristics. This device is designed to operate within a specified temperature range with a lower limit generally set at -40°C. It operates at a frequency of 150MHz Hz. 5.5Vis the maximum voltage available to the device. It is possible for the device to operate at a voltage as low as 2V.
SN74LV393APWE4 Features
Embedded in the TSSOP package
Frequency of 150MHz
SN74LV393APWE4 Applications
There are a lot of Texas Instruments SN74LV393APWE4 Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Clocks
- Signal gating
- ANALOG SIGNAL PROCESSING
- Frequency dividers
- Decade counter/decimal decode display (CD4017B）
- Time delay circuits
- Divide-by-N counting
- Fixed and programmable counters greater than 10
- SQUARING