SN74LV373ATDBG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LV373ATDBG4 Overview
A package called 20-SSOP (0.209, 5.30mm Width) contains it. A package of Tube has been used. Tri-State is used for the output it is configured with. The Logic type of this electrical device is D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 2V~5.5V supply voltage is required to operate it. The operating temperature is -40°C~85°C. The 74LV series contains FPGAs of this type. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. It is a member of the 74LV373 family. The supply voltage of the device is 5V. With 20 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of LV/LV-A/LVX/H. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. As far as ports are concerned, this device has 2 ports. This part can be found within the FF/Latches subcategory. A total of 3.3V power supplies are required for it to operate. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With an output current of 16mA, it is highly flexible in terms of design. High efficiency requires maintaining the supply voltage at 5V.
SN74LV373ATDBG4 Features
20-SSOP (0.209, 5.30mm Width) package
74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
SN74LV373ATDBG4 Applications
There are a lot of Texas Instruments SN74LV373ATDBG4 Latches applications.
- Display
- Relay
- OC-48 communication systems
- Digital bus buffer
- Programmable binary
- Control circuits
- Audio and video switching
- Parallel data synchronization
- Automotive HEV/EV Powertrain
- Up-Down Johnson