SN74LV373AIPWRQ1
| Parameters | |
|---|---|
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 16mA 16mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Output Lines | 8 |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV373 |
SN74LV373AIPWRQ1 Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. This package has the format of Tape & Reel (TR). Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. A 2V~5.5V supply voltage is required to operate it. It is -40°C~85°C at the operating temperature. There are a number of FPGAs in this series, including this one. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. As a member of the 74LV373 family, it falls under that category. The device works with a voltage of 2.5V for its supply voltage. The 20 pind are equipped with it. It is part of the family of electronic devices called LV/LV-A/LVX/H. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. During this period, the maximum supply voltage (Vsup) reaches 5.5V. There are 3.3V power supplies required for this machine to operate. It is recommended to have a higher supply voltage (Vsup) than 2V. Based on its reliable performance, this device is well suited to TR. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. In total, it has 1 elements. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 0.02mA.
SN74LV373AIPWRQ1 Features
20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74LV series
8 Bits
74LV373 family
20 pin count
20 pins
3.3V power supplies
1 elements
SN74LV373AIPWRQ1 Applications
There are a lot of Texas Instruments SN74LV373AIPWRQ1 Latches applications.
- Serial Input
- Shift right with parallel loading
- A/D converters
- TV Set-top Boxes
- Double bus register system
- Parallel Input
- Automotive ADAS
- Clocks
- Parallel Output
- Instrumentation