SN74LV174AD
| Parameters | |
|---|---|
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 12mA |
| Clock Frequency | 180MHz |
| Propagation Delay | 20.6 ns |
| Turn On Delay Time | 3 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 9.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.7pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
SN74LV174AD Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. It is included in the package Tube. It is configured with Non-Invertedas an output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 2V~5.5Vvolts. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. FPGAs belonging to the 74LVseries contain this type of chip. You should not exceed 180MHzin the output frequency of the device. In total, there are 1 elements. There is a consumption of 20μAof quiescent energy. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74LV174family make up this object. It is powered by a voltage of 2.5V . The input capacitance of this JK flip flopis 1.7pF farads. In terms of electronic devices, this device belongs to the LV/LV-A/LVX/Hfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 7 circuits to achieve it. The D latch operates on 3.3V volts. This T flip flop features a maximum design flexibility due to its output current of 12mA. It has 2lines.
SN74LV174AD Features
Tube package
74LV series
16 pins
3.3V power supplies
SN74LV174AD Applications
There are a lot of Texas Instruments SN74LV174AD Flip Flops applications.
- Frequency division
- Frequency Dividers
- Synchronous counter
- Circuit Design
- Functionally equivalent to the MC10/100EL29
- EMI reduction circuitry
- Guaranteed simultaneous switching noise level
- Storage Registers
- QML qualified product
- Clock pulse