SN74LV165APWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 11.9 ns |
| Turn On Delay Time | 28 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV165APWTG4 Overview
As a result, TSSOP package contains the embedded device. It sums up to 16 where the chip's terminations add up. This item is packed in case Tape & Reel (TR). 2.5V is the part's operating supply voltage. A total of 1 elements can be found on this part. Devices with 16 pins are available. The recommended mounting method is Surface Mount. Electronic components fall under the category of LV/LV-A/LVX/H. It is noted that this chip uses an operating supply voltage of 5V. There are also the following additional considerations in this section: SISO OPERATION ALSO AVAILABLE. In the device, there are 9 input lines. There is a possibility of delivering voltage at 3.3V. IC chip bits total 8. There are a total of 16 pins on it. A temperature below 85°C is recommended for its use. For this device to operate, it cannot be lower than -40°C. It is employed under the condition of 5.5V. Voltages higher than 2V are used for this supply. In terms of its subcategory, it belongs to Shift Registers. 2 outputs are present on this part.
SN74LV165APWTG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV165APWTG4 Applications
There are a lot of Texas Instruments SN74LV165APWTG4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- data transfer
- 8-bit data storage
- Pattern Recognizers
- Serial to parallel converter
- Output expansion
- Interconnectors
- Cache memory in CPU
- Serial-to-parallel data conversion
- Data Format Converters