SN74LV165ADBR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LV165 |
| Function | Parallel or Serial to Serial |
| Number of Outputs | 2 |
| Output Type | Complementary |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 11.9 ns |
| Turn On Delay Time | 28 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Max I(ol) | 0.05 A |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV165ADBR Overview
16-SSOP (0.209, 5.30mm Width) package contains the device. It sums up to 16 where the chip's terminations add up. It is used to pack in Tape & Reel (TR) case. There is 2.5V operating supply voltage listed on the part. It is a part that has 1 elements on it. The device is equipped with 16 pins. The recommended mounting method is Surface Mount. In the LV/LV-A/LVX/H series, the electronic component belongs. The component is positioned in the way of Surface Mount. Operating temperatures are within the range of -40°C~125°C. The voltage supplied to it is within the range of 2V~5.5V. In this case, the electrical component belongs to the series 74LV. If you use the 74LV165 family, you can find parts that are similar. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. The minimum supply voltage (Vsup) for this part should not be less than 2V. Voltage can be delivered at 3.3V by the device. This part requires a maximum supply voltage (Vsup) of 5.5V. The total number of IC chip bits is 8. There are 8 circuits in this device. TR is the packaging way for the part. 2 outputs are provided by the part.
SN74LV165ADBR Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV165 family
It supplies 3.3V power
Packing Method : TR
SN74LV165ADBR Applications
There are a lot of Texas Instruments SN74LV165ADBR Shift Registers applications.
- Remote control holding register
- Output expansion
- Cache memory in CPU
- Counter
- ROM Chips
- Pattern Recognizers
- Data Processors
- Data manipulation
- LED matrix control
- Serial-to-parallel data conversion