SN74LV164APWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 59.987591mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV164APWTE4 Overview
The device is embedded in TSSOP package. This chip has a total termination count of 14. The Tape & Reel (TR) case contains it. The part operates at 2.5V voltage. A total of 1 elements are present on this part. The device is equipped with 14 pins. Surface Mount is recommended for mounting. The electronic component belongs to the LV/LV-A/LVX/H. The operating supply voltage of this chip is noted to be within the range 5V. This section has the following additional features: AND-GATED SERIAL INPUTS (A AND B). In the device, there are 2 input lines that are available for use. A voltage of 3.3V is possible with this device. In total, there are 14 pins on it. This product should not be used at temperatures above 85°C. This device should not be operated below -40°C. 5.5V is the supply voltage used. It is important to note that this supply voltage is higher than 2V.
SN74LV164APWTE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164APWTE4 Applications
There are a lot of Texas Instruments SN74LV164APWTE4 Shift Registers applications.
- Remote control holding register
- Pattern Recognizers
- Cache memory in CPU
- Sequence generator
- data transfer
- Parallel data
- Delay Line
- ROM Chips
- Parallel to serial converter
- Remote control holding register