SN74LS96N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 5 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 20mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 10000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS96N Overview
PDIP is the package in which the device is embedded. This chip has a total termination count of 16. Its operating supply voltage is rated at 5V. This electronic component is classified as LS. Please take note of the following additional aspects of this section: CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD. For this part, the minimum supply voltage (Vsup) should not be less than 4.75V. A voltage of 5V can be delivered by it. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). A total of 5 bits are present on the IC chip. There are a total of 16 pins on it. Temperatures higher than 70°C should not be used.
SN74LS96N Features
It supplies 5V power
SN74LS96N Applications
There are a lot of Texas Instruments SN74LS96N Shift Registers applications.
- Serial to parallel converter
- Interconnectors
- Remote control holding register
- LED matrix control
- Generate time delay toward digital circuits
- Sequence generator
- temporary data storage
- Remote control holding register
- Pseudo Random Pattern Generator
- Data Format Converters