SN74LS96D
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 5 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 20mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS96D Overview
There is an embedded device in the package SOIC. 16 is the total number of terminations on the chip. 5V is the operating supply voltage of the part. The electronic component belongs to the LS. Please take note of the following additional aspects of this section: CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD. There should be no voltage less than 4.75V at the minimum supply voltage (Vsup). It can deliver voltage at 5V. 5.25V Vsup is the maximum supply voltage (Vsup) for this part. The total number of IC chip bits is 5. The total number of pins is 16. The temperature should not exceed 70°C.
SN74LS96D Features
It supplies 5V power
SN74LS96D Applications
There are a lot of Texas Instruments SN74LS96D Shift Registers applications.
- ROM Chips
- store data in digital form
- data manipulation
- Flash Memory
- Generate time delay toward digital circuits
- Dual-rank shift, hold, and bus applications
- Parallel to serial converter
- Data Processors
- data transfer
- 8-bit data storage