SN74LS74ANSRG4
| Parameters | |
|---|---|
| Output Current | 8mA |
| Clock Frequency | 33MHz |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 13 ns |
| Family | LS |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
SN74LS74ANSRG4 Overview
In the form of 14-SOIC (0.209, 5.30mm Width), it has been packaged. It is contained within the Tape & Reel (TR)package. As configured, the output uses Differential. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LS series. Its output frequency should not exceed 33MHz Hz. Currently, there are 14 terminations. This D latch belongs to the family of 74LS74. Power is provided by a 5V supply. It is a member of the LSfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. Its flexibility is enhanced by 2 circuits. This D flip flop is well suited for TR based on its reliable performance. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. It offers maximum design flexibility with its output current of 8mA. A total of 3input lines have been provided.
SN74LS74ANSRG4 Features
Tape & Reel (TR) package
74LS series
14 pins
5V power supplies
SN74LS74ANSRG4 Applications
There are a lot of Texas Instruments SN74LS74ANSRG4 Flip Flops applications.
- Matched Rise and Fall
- Memory
- Latch-up performance
- Counters
- Parallel data storage
- Clock pulse
- Convert a momentary switch to a toggle switch
- Data transfer
- Balanced 24 mA output drivers
- Consumer