Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
24 |
Weight |
3.740011g |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Number of Terminations |
24 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Technology |
TTL |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Load Capacitance |
45pF |
Number of Bits |
16 |
Propagation Delay |
40 ns |
Turn On Delay Time |
45 ns |
Family |
LS |
Logic Function |
Shift Register |
Direction |
Unidirectional |
Output Characteristics |
3-STATE |
Output Polarity |
TRUE |
Logic IC Type |
SERIAL IN PARALLEL OUT |
Trigger Type |
NEGATIVE EDGE |
Power Supply Current-Max (ICC) |
80mA |
Number of Output Lines |
17 |
fmax-Min |
20 MHz |
Height Seated (Max) |
5.08mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
SN74LS673NE4 Overview
There is a PDIP package embedded with the device. The number of the chip's terminations sums up to 24. Its operating supply voltage is rated at 5V. A total of 1 elements are present on this part. There are 24 pins on the device. It is recommended to mount by Through Hole. Electronic components fall under the category of LS. It is noted that the operating supply voltage of this chip falls within the range 5V. IC chips contain a total of 16 bits. There are a total of 24 pins on it. This product should not be used at temperatures above 70°C. Operation of this device requires a value greater than 0°C. A voltage of 5.25V is used to supply this voltage. Voltages higher than 4.75V are used for this supply. It is necessary to operate 17 output lines.
SN74LS673NE4 Features
With 24 pins
Operate supply voltage at 5V
With 17 output lines
SN74LS673NE4 Applications
There are a lot of Texas Instruments SN74LS673NE4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Generate time delay toward digital circuits
- Serial-to-parallel data conversion
- temporary data storage
- Pseudo Random Pattern Generator
- data manipulation
- Pattern Recognizers
- Serial-to-parallel data conversion
- Data Processors