SN74LS598NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 20 |
| Weight | 1.200007g |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 45pF |
| Propagation Delay | 48 ns |
| Turn On Delay Time | 48 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 10 |
| fmax-Min | 35 MHz |
| Length | 24.325mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS598NE4 Overview
In package PDIP, there is an embedded device. 20 is the sum of the number of terminations in the chip. A Rail/Tube case holds it. The part's operating supply voltage is rated 5V. 1 elements make up this part. It is equipped with a pin count of 20. As a general recommendation, mounting by Through Hole is recommended. It is a component of the LS. A range of 5V is noted as the operating supply voltage of this chip. This section has the following additional features: COMMON I/O PINS; MUXED SERIAL INPUTS; TOTEMPOLE SERIAL OUTPUT. 10 input lines are available on the device. A voltage of 5V can be delivered by it. In total, it has 20 pins. Under temperatures below 70°C, it is recommended to use it. It should not be lower than 0°C to operate this device. 5.25V is the supply voltage used. The supply voltage is higher than 4.75V.
SN74LS598NE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS598NE4 Applications
There are a lot of Texas Instruments SN74LS598NE4 Shift Registers applications.
- Serial to parallel converter
- temporary data storage
- data transfer
- Remote control holding register
- store data in digital form
- Serial-to-parallel data conversion
- Output expansion
- Serial-to-parallel data conversion
- LED matrix control
- Pattern Recognizers