SN74LS377NG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.75V~5.25V |
| Base Part Number | 74LS377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 40MHz |
| Current - Quiescent (Iq) | 28mA |
| Current - Output High, Low | 400μA 8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 27ns @ 5V, 15pF |
| Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
SN74LS377NG4 Overview
The package is in the form of 20-DIP (0.300, 7.62mm). It is contained within the Tubepackage. In the configuration, Non-Invertedis used as the output. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Through Hole. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. 0°C~70°C TAis the operating temperature. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LS series. You should not exceed 40MHzin the output frequency of the device. The element count is 1 . There is a consumption of 28mAof quiescent energy. JK flip flop belongs to 74LS377 family.
SN74LS377NG4 Features
Tube package
74LS series
SN74LS377NG4 Applications
There are a lot of Texas Instruments SN74LS377NG4 Flip Flops applications.
- 2 – Bit synchronous counter
- Differential Individual
- Set-reset capability
- Instrumentation
- Communications
- Buffered Clock
- Latch
- Functionally equivalent to the MC10/100EL29
- Divide a clock signal by 2 or 4
- Bus hold